Shattered or cracked panel
Most shower screens are toughened safety glass, which breaks into small pieces. A broken or cracked panel is replaced with a new panel made to the measured size.
Shower screen glass
Assessment and replacement for cracked, shattered or damaged shower screen panels and doors. The glass, hinges, brackets, seals, wall and kerb are reviewed together before the scope is confirmed.
Common problems
The right scope depends on which part has failed.
Most shower screens are toughened safety glass, which breaks into small pieces. A broken or cracked panel is replaced with a new panel made to the measured size.
Often a hinge, bracket or seal problem, not a glass problem. The hardware is assessed with the glass and quoted as a separate item when it needs work.
Water stains, soap residue and scratches are different problems. See glass scratch removal and the cloudy shower glass guide.
What to send
Take photos from outside the shower area if there is broken glass inside.
Identify the screen type, the damaged panel and the fittings that hold it.
Confirm panel sizes, hole and notch positions, and the wall and kerb condition.
Confirm the new glass, and which hinges, brackets and seals are reused or replaced.
Fit the panel, then check the door swing, seals and gaps.
Why it breaks
Toughened glass is strong on its face but sensitive at its edges and around holes. Common triggers include:
A chip on the edge weakens the panel, and the break may come later.
Hinges and brackets that let the glass move, or clamp it too hard, put stress on the holes.
A panel that rubs on a wall, kerb or metal fitting without a gasket can chip and fail.
If your screen has a chipped edge or a door that has dropped, send photos before it gets worse.
Cost
No standard price is published for this work. The quotation depends on:
Send photos and approximate sizes on WhatsApp for a first view. The written quotation is the price.
Broken glass
A few sensible steps while the replacement is being arranged.
Keep children and pets out until the glass is cleared.
Wear covered shoes and thick gloves and sweep up the pieces. Check the corners and the drain cover.
A cracked toughened panel can give way. Stop using the door and avoid touching the panel.
Photos of the remaining panels, hinges and brackets help confirm what can be reused.
Shower screen FAQ
No. Shower screens are normally toughened safety glass, and a cracked or shattered toughened panel cannot be repaired. The damaged panel is replaced with a new panel made to the measured size.
Often only the damaged panel needs replacing. That depends on whether a matching glass thickness and finish can be supplied and whether the existing hinges, brackets and seals are in sound condition, which is confirmed during assessment.
Toughened glass is sensitive at its edges and around holes. Common causes include a knock or chip on an edge or corner, loose or over-tightened hinges and brackets, and glass rubbing against tile or metal. The break can come some time after the original damage.
No standard price is published for this work. The cost depends on whether one panel or the whole screen is replaced, the glass thickness, size and finish, the holes and notches required, whether the fittings can be reused, and access. The written quotation is the price.
No fixed time is promised on this website. A toughened panel is made to measure after the site measurement, so the job is normally a measurement visit followed by a fitting visit once the panel is ready. Timing is confirmed in the quotation.
Light surface scratches can be assessed for polishing, and water stains or soap residue are assessed separately because they are not scratches. A cracked, chipped or shattered panel is a replacement job.
Other pages that may match your job.
A brand-new shower screen installation is a different job from replacing damaged glass. WhatsApp us a photo of the bathroom and a short description to ask whether we can help.
Ask on WhatsApp